Ms Dos 6.22 Mouse Drivers For Mac

Windows 3.1 came with a default PS/2 mouse driver. Sometimes the IRQ setting with the mouse may conflict with another device installed on your motherboard - most often the modem. To resolve this IRQ conflict: 1. In the Main group, choose the Control Panel icon. In the Control Panel window, choose the Ports icon.

1. Ms Dos 6 2
2. Dos Mouse Driver Download

MS-DOS 6.22 Supplemental Utilities. My copy of MS-DOS includes a fourth disk titled 'MS-DOS 6.2 Supplemental Utilities,' which can also be obtained from the link above (grab the version for MS-DOS 6.22, named SUP622.EXE). Another mouse installation program for DOS is mouse.exe. This file will make a mouse driver installation diskette. Both programs have testing software built in. Thanks to Mark O' If you want a mouse to work on your bootdisk copy mouse.com to your bootdisk and add a line in the autoexec.bat like this: mouse, or a: mouse.com, or a: mouse. Jun 19, 1995 - The computer comes with MS-DOS 6.22 and Windows 3.1 (and does not 'support'. The main software for configuring the DOS card in the Macintosh environment is. The PC and Macintosh share the keyboard and mouse.

In the Ports dialog box, select the COM port for the mouse. Normally the mouse is eaither on COM1 or COM2. (The mouse uses a different driver for MS-DOS-based applications than it does for Windows-based applications. Do not install a modem on COM3 if you have a mouse on COM1, or a modem on COM4 if you have a mouse on COM2 - unless your machine or serial I/O card supports IRQ sharing.) and then choose the Settings Button. In the Settings dialog box, choose the Advanced button.

Ms Dos 6 2

Dos Mouse Driver Download

Open the Interrupt Request Line (IRQ) list box, and select 12 (this is the default PS2 mouse IRQ. Choose the OK button twice to exit the settings dialog boxes, and then choose the Close button to exit the Ports dialog box. You may need to reboot the computer, but this should solve the problem (if it is a IRQ conflict, as I suspect).